Masonry & Floor Coating
GarageGuard is a water-based, catalyzed epoxy that delivers superior chemical, abrasion, and impact resistance in a durable, semi-gloss coating. Can be used on garage floors, basement floors, and other concrete surfaces. GarageGuard is cross-linked for outstanding hardness and chemical resistance.
TuffCrete® Waterborne Acrylic Concrete Stain
TuffCrete Waterborne Acrylic Waterproofing Concrete Stain is a water-reduced acrylic concrete coating designed for application to interior or exterior masonry surfaces. It may be applied in one coat, as a stain, or in two coats for an opaque finish.
Tough Shield® Floor and Patio Coating
Tough Shield Floor and Patio Coating is a waterborne, acrylic enamel designed to produce a rugged, durable finish with good abrasion resistance. For use on interior and exterior floors and patios and a variety of other substrates.
Sure Step® Acrylic Anti-Slip Coating
Sure Step Acrylic Anti-Slip Coating provides a durable, skid-resistant finish for interior or exterior application. Imparts excellent color retention, abrasion resistance, and resistance to ponding water. Sure Step is water-reduced which allows for fast drying, easy application, and easy clean up.
Super Kote 5000® Production Block Filler
Texcrete® WB Acrylic Masonry Waterproofer
Texcrete Direct-to-Concrete Waterproofer is a VOC-compliant waterproofing coating that can be applied directly to both cured and uncured high-pH concrete. Available in a range of textures, it requires neither primer nor filler when applied to smooth masonry surfaces.
Texcrete Silicone Water Repellent
Texcrete Silicone-based Water Repellent is a clear, water-repellent sealer that produces a breathable barrier on masonry. This barrier prevents chlorine penetration and reduces cracking, dirt pickup, efflorescence and damage from freezing/thawing cycles. Because it is clear, the sealer penetrates deep into substrates without changing their appearance.
Elastite® 100% Acrylic Elastomeric Coating
Elastite 100% Acrylic Elastomeric Coating is designed to keep damaging water and moisture vapors out of commercial and residential structures. It creates a flexible waterproofing membrane that prohibits wind-driven rain from entering through the coating film.
WaterBlock acrylic masonry waterproofer is designed to seal interior and exterior masonry surfaces such as basement walls, foundations, and retaining walls. WaterBlock is alkali resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco or tilt-up concrete walls.